Need help?Do you have a question about the Mooer Red Truck and is the answer not in the manual?
Use the correct AC outlet and power transformer for safe operation.
Turn off power before connecting/disconnecting devices to prevent damage.
Avoid direct sunlight, magnetic fields, dust, vibration, heat, and humidity.
Use the unit away from radios and TVs to prevent interference.
Use a dry, soft cloth; avoid harsh chemicals or wet wipes.
Use controls gently, avoid inserting objects, and protect from drops.
Device complies with Part 15 of FCC Rules, may not cause interference.
Press several times for tap tempo; hold for tuner activation.
Controls individual effects (Reverb, Delay, Mod, Dist, Drive) or presets.
Shows current operation mode (Live/Preset) and tuner status.
Operates like a traditional pedalboard; footswitches toggle effects on/off.
Operates like a loop switcher; footswitches recall effect combinations.
Analog clean boost up to +20 Db with natural response.
Warm analog overdrive emulating vintage amp breakup.
British-style amplifier distortion with full tone stack.
Multi-modulation unit with tremolo, phaser, chorus, and flanger.
Digital delay unit with DIGITAL, ECHO, and ANALOG modes.
True stereo digital reverb unit with shimmer and modulation.
Accurate built-in guitar tuner activated via TAP footswitch.
Connect your instrument using a standard 1/4" jack cable.
Refer to the 'USING THE FX LOOP' section for details.
Output with speaker simulation for headphones or PA systems.
Connect to L for mono or L/R for stereo output.
Connect your power supply (9V, >=300mA) to this input.
General| LED indicators | Yes |
|---|---|
| Amplifier class | - |
| Output impedance | 100 Ω |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| Purpose | Home |
| Product color | Black, Red |
| Volume control | Rotary |
| Connectivity technology | Wired |
| DC input voltage | 9 V |
| Headphone outputs | 1 |
| Speakers connectivity type | 1/4\ |
Weight and Dimensions| Depth | 370 mm |
|---|---|
| Width | 96 mm |
| Height | 51 mm |
| Weight | 1200 g |
To Next Page
