Need help?Do you have a question about the Mooer Ocean Machine and is the answer not in the manual?
Covers power supply, connections, cleaning, interference, and location guidelines for safe operation.
Explains how to navigate and use the menu screen for deeper editing.
Details footswitch operations and preset selection in Patch Mode.
Explains parameter adjustments and real-time control in Patch Mode.
Describes the screen for selecting and previewing presets.
Details the control page for real-time parameter adjustments within a preset.
Explains the looper's capabilities: recording time, overdubbing, half speed, and reverse.
Details how footswitches and the Menu control operate within the looper.
General| Outputs | 2 x 1/4" |
|---|---|
| Current Draw | 300mA |
| Type | Delay, Reverb, Looper |
| Delay Types | Digital, Analog, Tape |
| Reverb Types | Room, Hall, Plate, Spring, Mod, Shimmer |
| Looper | 44 seconds |
| Inputs | 2 x 1/4" (instrument) |
| Power Supply | 9V DC (center negative) |
| Delay Time | Up to 2000ms |
| Footswitches | 3 |
| MIDI | In/Out |
| Controls | Time, Feedback, Level, Tone |
To Next Page
