Name: Moog Grandmother
Brand: Moog
Rating: 4 (1 reviews)

To Next Page

To Previous Page

V1.1.0 RELEASE NOTES

Global Parameters

Group 2

Group Select Key Parameter Select Key

2.1 Separate MIDI Channels G#2 F#0

To set only MIDI OUT channel, go into Global Edit mode and then press and hold the highest G# key (G#2); while holding that

also press the lowest black key (F#0). Then, the lowest 16 white keys set MIDI OUT channel 1-16. The original MIDI Channel global

option (just pressing lowest F#0 key by itself) continues to set both MIDI IN and OUT channels to the selected channel number.

2.2 MIDI OUT Filter - Panel Knobs G#2 G#0

F0 = off, G0 = on (default). This setting controls whether or not MIDI CC messages are output in response to changes made to the

front panel controls. ON is the setting that allows messages to be sent. When MIDI Out Filter - Panel Knobs is OFF, then no MIDI CC

messages are output from Grandmother in response to panel control changes.

2.3 MIDI OUT Filter - Pitch/Mod Wheels G#2 A#0

F0 = off, G0 = on (default). This setting controls whether or not MIDI CC messages are output in response to movement of the

Pitch Wheel or Mod Wheel. ON is the setting that allows messages to be sent.

2.4 MIDI OUT Filter – Keys G#2 C#1

F0 = off, G0 = on (default). This setting controls whether or not MIDI Note messages are output in response to playing on the

Grandmother keyboard. ON is the setting that allows MIDI notes to be sent.

Other manuals for Moog Grandmother

Questions and Answers:

Need help?

Do you have a question about the Moog Grandmother and is the answer not in the manual?

General