54
SPECIFICATIONS
TYPE: Semi-Modular Analog Synthesizer
SOUND ENGINE: Analog
NUMBER OF KEYS: 32 Full-Size Keys
TYPE OF KEYS: Velocity-sensing (Velocity signal is not hard-wired – available via MIDI and
KBD VEL OUT jack)
OTHER CONTROLLERS: Pitch Bend, Mod Wheel, Variable Glide
POLYPHONY: Monophonic
SOUND SOURCES: 2 Oscillators with selectable Waveforms (Oscillator 2 supports Sync to Oscillator 1
plus linear FM), 1 White Noise Generator, External Input jack
VCF FILTER (LOW PASS): -24dB/Octave Moog Ladder Filter with Resonance (Self-Oscillating)
STATIC FILTER (HIGH PASS): -6dB/Octave
MOD SOURCES: Modulation Oscillator (Sine, Sawtooth, Ramp, Square), S/H Output, plus Envelope
and Key Tracking
ENVELOPE: Four-Stage (ADSR)
ATTENUATOR: Bipolar
MULT: Four Parallel-wired Non-buffered Patch Points
EFFECTS: Spring Reverb
ARPEGGIATOR / STEP SEQUENCER: (256 Steps; three Sequence Files)
PATCH POINTS:
41 x 3.5mm front and rear panels
21 Inputs
16 Outputs
4 Parallel-wired Mults.
AUDIO INPUT: One 1/4” TS jack (Rear Panel)
AUDIO OUTPUT: One 1/4” TRS jack for headphones or line level output (Rear Panel)
WARNING: Use a TS instrument cable for line output applications. Do not use a TRS (balanced) cable, or
phase cancellation may cause a very weak signal.
MIDI I/O: 5-pin DIN In, Out, Thru; plus MIDI over USB (Rear Panel)
DIMS: 23” (54.82cm) Wide x 14 1/4” (36.19cm) Deep x 5 1/2” (13.97cm) High
POWER: Included Power Adapter 12V DC (positive tip), 2A, 100 to 240 Volts AC, 50/60Hz
WEIGHT: 16lbs. / 7.25kg
To Next Page
Loading...
