Moog Minimoog Tuning Procedure

SHIFT
OSCx=OSC1, OSC2, or OSC3
44) Turn on OSCx in the mixer on the front panel.
All other switches in the mixer should be OFF.
45) Change OSCx RANGE switch on the front panel to 16.
46) Hold down the HIGH A key and adjust OSCx SHIFT trimpot for 440hz.
repeat for each oscillator
You're done! Reinstall the rear cover and enjoy!

Moog Minimoog Specifications

General

Keyboard	44-note
Polyphony	Monophonic
Year Released	1970
Type	Analog
Oscillators	3
Filter	24 dB/oct low-pass filter
Waveforms	Sawtooth, Triangle, Square, Pulse
Controls	Modulation Wheel
LFO	No dedicated LFO; Oscillator 3 can be used as an LFO