Moog Subharmonicon - Page 21

22
SUB 1 LEVEL (VCO 1)
This knob sets the level of SUB 1 — the first subharmonic oscillator associated
with VCO 1. Rotating the knob clockwise raises the level; rotating it counter-
clockwise lowers the level.
SUB 2 LEVEL (VCO 1)
This knob sets the level of SUB 2 — the second subharmonic oscillator
associated with VCO 1. Rotating the knob clockwise raises the level; rotating it
counter-clockwise lowers the level.
VCO 2 LEVEL
This knob sets the level of the VCO 2 signal. Rotating this knob clockwise will
raise the level; rotating this knob counter-clockwise will lower the level.
SUB 1 LEVEL (VCO 2)
This knob sets the level of SUB 1 — the first subharmonic oscillator associated
with VCO 2. Rotating the knob clockwise raises the level; rotating it counter-
clockwise lowers the level.
SUB 2 LEVEL (VCO 2)
This knob sets the level of SUB 2 — the second subharmonic oscillator
associated with VCO 2. Rotating the knob clockwise raises the level; rotating it
counter-clockwise lowers the level.
THE MIXER (Continued)