39
SYNCING SUBHARMONICON TO YOUR MOTHER-32
Use a patch cable to connect the
Mother-32 ASSIGN output jack
to the Subharmonicon CLOCK
input jack.
This will allow Mother-32 to serve
as the clock for both units.
NOTE: Setting the ASSIGN output
jack to CLOCK is described on
page 44 of the Mother-32 manual.
Before you press the Mother-32 RUN/STOP (REC) button, press the PLAY
button on your Subharmonicon. This will ensure that it is ready to play when
it begins to receive a clock signal from your Mother-32.
Press the RUN/STOP (REC) button on the Mother-32. Both units should now be
playing in sync.
TIP: Mother-32 can transmit different clock divisions depending on its internal settings.
Experimenting with these clock divisions allows Subharmonicon to play in sync with
Mother-32, but at a division of the master tempo.
SUBHARMONICON MOTHER-32
To Next Page
Loading...
