2022-09-07 - 22 - 2200700
• Boat is turned on
• AutoWake is turned on
• Actual speed is less than
3mph.
The system will attempt to fill and/or drain
ballasts to reach a static pitch, roll and
displacement setpoint. If pitch or roll setpoints
cannot be achieved, a pop-up will occur
indicating this to the driver (AutoWake will
remain in the Active state).
• Boat is turned on
• AutoWake is turned on
• Actual speed is less than
3mph
• Pitch, roll and amplitude
values match their respective
setpoints.
If pitch or roll setpoints cannot be achieved, a
pop-up will occur indicating this to the driver and
AutoWake will remain in Static AutoWake Active
state. If pitch and roll are achieved and
amplitude is as close as possible to setpoint, the
AutoWake system will go to this state.
AutoWake settings can be found and edited in
the Vessel Settings menu.
To Next Page
Loading...
