2022-09-07 - 11 - 2200700
Ballast
Ballast is used to add displacement to the craft
to make the waves or wakes larger for specific
watersports. This Moomba model is outfitted
with one ballast bag located in the front, and two
ballast bags located in the port and starboard
sides of the rear. Touch the graphical level
representation of one of the ballast settings on
the main screen, and this screen will appear:
The highlighted ballast bag will display controls
at the bottom of the screen to increase or
decrease the ballast percentage. Use the – and
+ buttons to achieve the desired level. Touch an
alternate ballast to adjust if necessary.
Touch Drain All, Stop All or Fill All when it is desirable to have all ballasts with the same levels.
To Next Page
Loading...
