moore o matic 750 - User Manual

Model 700/727/750/757 S & J &700-240 date from 70’s to approx.
1989.
Check the serial # if the unit is pre 83 NO PARTS ARE AVAILABLE.
If newer than 83 warn the customer of parts being obsolete.
The following parts are available at this time 8/9/00, check inventory
before committing to availability. When our inventory is depleted the
parts will be considered obsolete/NLA
.
DESCRIPTION OLD PART# NEW PART #
9 TOOTH PINION GEAR A6725 A6725 NLA
CAPACITOR 43-53 MFD A6993 210719
CAPACITOR 53-64 MFD 6026-000 210718
LIGHT LENS 8311-000 8311-000
TORQUE SENSOR
(RPM)
A7767 A7767P
LIMIT GEAR A6720 A6720
38 TOOTH GEAR A6721 A6721
36/9 TOOTH GEAR A6723 A6723
9 TOOTH SPROCKET
(JAMB)
A6728 A6728
13 TOOTH
SPROCKET(
SECTIONAL)
A6724 A6724 - use A7274
LOGIC BOARD AAE00341 AAE00341

Summary

REPLACEMENT PARTS LIST

SAFETY PRECAUTIONS

General Safety and Preparation

Precautions for door preparation, wiring, children's safety, and torque sensing.

PRE-INSTALLATION

Door Hardware and Tool Requirements

Importance of lubricating door hardware and list of required installation tools.

COMPONENT PARTS REQUIRED FOR INSTALLATION

INSTALLATION

Door Type Identification

Identifying door types (sectional, one-piece track) for appropriate installation steps.

Mounting the Header Bracket

Steps for determining high-rise point and mounting the header bracket for sectional and track doors.

ADJUSTING DOOR PRESSURE SENSITIVITY

TRACKLESS DOORS (JAMB) INSTALLATION

THE POSI-LOCK STOP

ATTACHING LIGHT LENS

TROUBLE SHOOTING GUIDE

HOW TO OBTAIN REPLACEMENT PARTS AND SERVICE

ACCESSORIES AVAILABLE FROM FACTORY OR RETAIL STORE

moore o matic 750 Specifications

General

Horsepower	1/2 HP
Remote Controls	2
Safety Sensors	Yes
Battery Backup	No
Warranty	1 year
Drive Type	Chain