moore o matic 800 User Manual

Model 800,838, 800-220 Volt date from 70’s to approx. 1989.
Check the serial # if the unit is pre 83 NO PARTS ARE AVAILABLE.
If newer than 83 warn the customer of parts being obsolete.
The following parts are available at this time 4/20/99, check inventory
before committing to availability. When our inventory is depleted the
parts will be considered obsolete/NLA
.
DESCRIPTION OLD PART# NEW PART #
BELT PULLEY 17 T B5560 211639
PULLEY 57 T B5584 211814
TORQUE LEVER B5593 B5593
TORQUE BLOCK B5594 B5594
OBSTACLE SWITCH A6775 A6775
CAPACITOR 6026-000 210718
LIGHT SOCKET B5656 211792
LIGHT LENS B5596 211803
LOGIC BOARD AAE00355

moore o matic 800 Specifications

General

Motor Type	AC
Horsepower	1/2 HP
Chain Drive	Yes
Frequency	60 Hz
Type	Residential Garage Door Opener
Remote Control	Yes
Safety Sensors	Yes
Voltage	120V
Maximum Door Height	7 ft

Summary

Homeowner's Installation and Operation Manual

Screw-Drive Opener Models 800, 838, 800-220

Details installation and operation for screw-drive openers, specifically models 800, 838, and 800-220.

Adjusting Door Travel

Up-Down Travel Adjustment

Procedure for setting the door's upward and downward travel limits.

Adjusting Door Pressure Sensitivity

Jamb Doors Installation

Attaching the Header Bracket

Instructions for installing the header bracket for jamb doors, including measurements and location.

Troubleshooting Guide

How to Obtain Replacement Parts and Service

Installation Manual Addendum #3

Connecting External Obstruction-Sensing Devices

Information on connecting external obstruction sensors to Series 600, 700, 800, and 900 operators.

Accessories Available from Factory or Retail Store