*REFER TO CHECK SHEET FIRST
1/99
SAFETY OPERATION
Again, the single most important chipper
safety rule is: NEVER BREAK THE PLANE
OF THE INFEED CHUTE WITH YOUR
HANDS, AND NEVER, FOR ANY REASON,
ATTEMPT TO KICK BRUSH IN WITH YOUR
FEET!
To safely feed short material, place the feed
system in the neutral position. Lay the short
material on top of longer material and en-
gage the feed system.
You should never attempt to feed handfuls of
twigs, leaves and other material that has
been raked up. There is no way to get it into
the chipper without violating safety rules.
This material should be placed in the chip
van or chip pile directly. Not only is it danger-
ous to feed the material, but it can contain
rocks, metal and other material that can
damage the chipper.
NEVER BREAK THE PLANE OF THE INFEED WITH HANDS
OR FEET!
To safely feed short material, place it on top of longer material.
DON'T try to feed twigs, leaves and rakings!
10
To Next Page
Loading...