Need help?Do you have a question about the Morbark TORNADO 13 and is the answer not in the manual?
Component holding the chipper knives, dynamically balanced.
Supports the chipper drum.
Allow for accumulation and discharge of chips.
Holds the chipper drum assembly and bearings.
The component the chipper knife cuts against, adjustable.
Attached to the chipper drum with four bolts.
Feeds material at a steady rate to the chipper drum.
Stabilizes the drum during knife changes.
Allows operator access to the chipper drum.
Keep children and untrained personnel away from the machine.
Use close-fitting clothing and safety equipment.
Handle flammable fuel with care, avoid sparks and flames.
Keep first aid kit and fire extinguisher handy.
Understand and follow all safety signs on the machine.
Owner's responsibility to instruct operators and ensure familiarity with manual.
Manual and video tape prepared for owners and operators.
Accidents are caused by mistakes; requires effort and concentration.
Step-by-step procedures for safe operation.
Controls hydraulic flow to the feed wheel, stops and reverses it.
Never place hands or feet inside the infeed chute while running.
Feeding wood, operator responsibilities, bystander safety.
Procedures for safe maintenance, including key removal.
Key safety recommendations and precautions for operation.
Procedures for proper engine break-in for longevity.
Recommended attire and safety equipment for operators.
Pre-operation checks for safety and readiness.
Steps for inspecting knives, bolts, and bearings.
Detailed procedure for replacing or reversing chipper knives.
How to inspect and adjust the anvil clearance for optimal cutting.
Guidance on knife sharpening angle and professional service.
Reference table for bolt tightening torques.
Procedures and precautions for maintaining the air filter system.
Schedule for lubricating key components like bearings and pivots.
Steps to check and adjust belt tension for proper operation.
Guidelines for safely towing the chipper.
Step-by-step guide to setting up the auto-feed system.
Solutions for the chipper not feeding material properly.
Causes and solutions for chipper bearings running too hot.
How to clear blockages in the discharge spout.
Identifying and fixing causes of drum wobble.
Troubleshooting steps for a drum that won't turn.
Detailed list of parts for the chipper assembly.
Detailed list of parts for the infeed system.
Detailed list of parts for the axle assembly.
List of various components not categorized elsewhere.
Detailed list of parts for the machine enclosure.
Detailed list of parts for the engine cooling system.
Detailed list of parts for the engine intake and exhaust.
Detailed list of parts for the operator's gauge panel.
List of parts specific to the Cummins (4B) engine.
List of parts specific to John Deere engines.
Detailed list of parts for the hydraulic motor.
Schematic diagram of the machine's hydraulic system.
General| Brand | Morbark |
|---|---|
| Model | TORNADO 13 |
| Category | Farm Equipment |
| Language | English |
To Next Page