*REFER TO CHECK SHEET FIRST
1/99
Congratulations on your purchase of a new Morbark brush chipper. The brush chipper,
designed and introduced by the world's leading manufacturer of portable chippers, is produced
with the finest components and workmanship available. If you show proper care and
maintenance, your brush chipper will prove to be a safe and reliable unit.
This manual was prepared to make it easy for you to operate and maintain your new brush
chipper. In addition to guidelines for safe operation and maintenance, you will find parts listings
and detailed assembly illustrations.
The serial number of your brush chipper is located on the side of the tongue. If for any reason
you should find it necessary to correspond with us or one of our dealers, please include this
number.
We believe it is the responsibility of the customer to ensure that all personnel, especially
operators and maintenance people, view any applicable video tapes and become familiar with
this operator's manual prior to working with or around the brush chipper. Safety is everyone's
responsibility, but the owner/operator must assume the duty of making sure that these training
tools are actually used to help prevent injury.
The information, specifications and illustrations in this manual are based on the information in
effect at the time of approval for printing. We reserve the right to discontinue model lines at
any time or to change specifications of design without notice and without incurring obligations.
INTRODUCTION
2
To Next Page
Loading...