EasyManua.ls Logo

Morgan Olson C250 - Hood Release

Morgan Olson C250
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 37
Page 36
Page 33
1. Pull the hood release handle in the roadside
footwell area.
Hood Release
OPENING AND CLOSING THE HOOD
Make sure that you fully latch the hood
before driving. Failure to follow this instruction could result
in personal injury or death.
2. Pull the secondary release lever under the
front of the hood, above the grill near the center
of your vehicle. Raise the hood
3. To close, lower the hood until it fully latches.
Tire Model General Grabber APT All-Weather 265/70/R18
Tire Pressure 331 kPa (48 psi) Front / 331 kPa (48 psi) Rear
Engine Oil
Type
Motorcraft® SAE 5W-30 Super Premium Motor Oil
CXO-5W30-LSP6 (Canada)
5.7L capacity including lter
Brake Fluid
Type
Motorcraft® DOT 4 LV High Performance
Motor Vehicle Brake Fluid
PM-20 (U.S. & Canada)
Refrigerant
Type
R-1234yf
HS7Z-19B519-BA (Canada)
Transfer Case
Fluid
Motorcraft® MERCON® LV Automatic Transmission Fluid
CXT-10-LV6 (Canada)
Front Axle
Fluid
Motorcraft® Additive Friction Modier
CXL-3(Canada)
Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant
XY-75W85-QL (U.S. & Canada)
Rear Axle
Fluid
Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant
XY-75W85-QL (U.S. & Canada)
Fuel Type Regular unleaded gasoline with a minimum pump (R+M)/2 octane rating of 87
Coolant Motorcraft® Yellow Prediluted Antifreeze/Coolant
CVC-13DL-G (Canada)
13.5L Capacity
Maintenance
Page 34
C250 MAINTENANCE