Page22
HANDFEDCREASING
Papercreaseoutofsquare
• Checkthatthesheetsareallsquareandexactlythesamesizebeforeloadingthe
stackontothetable.
• Checkthattherollertiltmechanismiscorrectlysetandlockedinposition.
• Checkthattheadjustablesidelayhasbeencorrectlypositionedie.Nofurtherthan
0.5mmfromthepaperstack.
Paperjamming
•
Checkthatthefirstcreasepositionisnottooclosetotheleadingedgeofthepaper.
Aminimumdistanceof32mmisrecommended.
Machinewillnotstart
• Checkthepowersupplytothemachine.
• Checkthattheemergencystopbuttonhasbeenreleased.
• Checkthattheexitguardisdown.
• Checkthatthestackerunitislocatedcorrectlyandhasnotbeendisconnectedfrom
themagneticswitch.
• Checkthatthelowerblade/anvilisconnectingtothehomeswitch(mountedbelow
thelowerblade/anvil).
Papernotfeeding
•
•
Ensurethattheadjustablesidelayisnotpressedagainstthesheetofpaper.
Ondigitalmedia,thefeedingperformancemaybeimprovediftheleadingedgeof
thestackistrimmedbeforeloadingontothemachine.
Machinenotcounting
• Opentheexitandremovethebladeset
(seepages20-21)toaccessthedual
sensorpostlocatedinbetweenthedrive
rollers.Usingasoftbrush,cleanthe
visiblesensorontheendofthepost.
Usethebrushtocleanthesensors
betweenthepostandthebottompaper
guidewhicharenotvisible.
Photograph(left)showsthedualsensor
postcontainingthesensors.
TroubleShooting
To Next Page
