Morgana DocuFold Pro - Error Screens - Unit Fitment and Sensor Faults; Perforating;Scoring Unit Not Fitted Error; System Switch Not On Error; Lead Edge Sensor Fault

Page 41
DocuFold Pro
PAPER
FOLDER
Page 40
DISPATCH KIT
90 - 134
DOCUFOLD PRO OPERATORS MANUAL
90 - 018
ROLLER CLEANING KIT
620 - 006
ALLEN KEY
- 3mm
620 - 007
HEX BALL DRIVER
-
2mm
620 - 004
HEX BALL DRIVER
- 4.0mm
620 - 025
BONDUS 'L' WRENCH
-
2.5mm
1 - 99 - 41
PERFORATING SET
-
56T
- SLITTING
650 -040
POWER CORD
- C19 - 3Pin - UK
WARNING......
THE BLADES FOR ANVIL, PERFORATING, & SCORING SETS ARE
SUPPLIED AS MATCHED PAIRS AND SHOULD NEVER BE MIXED -UP OR
LEFT UN-PROTECTED AS SERIOUS DAMAGE WILL RESULT.
ITEM PART NUMBER QTY DESCRIPTION
1
1
2 1
3
4
1
5
8
9
10
1
11
1
1
14
1
6
7
1
1
15
1
1
5
1
620 - 020
HEX BALL DRIVER
-
2.5mm
1
620 - 027
BONDUS 'L' WRENCH
-
5.0mm
1
620 - 032
COMBINATION SPANNER
- 13 A/F
624 - 018
DISPATCH BOX
1 - 99 - 35
6 - 99 - 05
ANVIL SET
SCORING SET
- TYPE A
9-95-13 (USA)
Error Screens (continued)
Perforating / Scoring unit not fitted.
If the touchscreen shows the error screen shown below, this indicates that the
machine has been set for perforating or scoring (with or without folding) and the
perforating / scoring unit has not been fitted.
System switch not on.
If the touchscreen shows the error screen shown below, this indicates that the system
switch must be switched to the ON position.
Lead Edge Sensor Fault
If the machine stops and error message 60 is displayed on the touch screen, this
indicates that the lead edge sensor is blocked. Check that the paper path is clear.
This error message could also mean that the lead edge sensors are faulty or need
cleaning.
650 -041
POWER CORD
-
C19 - 3Pin - USA
1
13
12
617 - 004
GLASS BALL
16
650 -016
L6 - 15P Re-Wirable Plug (Used on USA Only)
1
9-95-12 (UK)
2
71-083-01
OUTRIGGER FOOT
17
2
401-02-050-008
SCREW - PAN POZI TAPTITE - M5 X 8 LONG
18