Morphy Richards Supreme Precision 10 in 1 Multicooker User Manual

11
8
After 5 minutes your Multicooker will beep
twice, this is the first prompt to add the next
set of ingredients listed in the recipe. Remove
the Lid, add the Ingredients and replace the
lid. Your Multicooker will continue to cook.
7
Press the Start Button (24), your Multicooker
will begin to cook.
9
Your Multicooker will prompt another 2 times
during the cooking process to add more
ingredients (times vary by programme). Refer
to the cookbook to add the correct
ingredients to the Jug.
10
When finished, your Multicooker will sound
and display ‘END’. Your Multicooker will slow
to speed 1 and continue mixing to prevent
food from sticking to the base of the Jug.
Press the Stop Button (30).
11
Remove the Lid by twisting anticlockwise and
then lifting away from the Jug. Angle the Lid
away from you when lifting, the contents will
be hot. Allow the water collected on the
inside of the Lid to fall back into the Jug, to
avoid drips onto your Multicooker.
Carefully remove the Mixing Paddle from the
Jug. WARNING HOT STEAM
12
Press the Jug Release Button (6) and remove
the Jug from the Main unit before serving.
562000 Rev2.qxp_Layout 1 19/01/2015 09:24 Page 11

Morphy Richards Supreme Precision 10 in 1 Multicooker Specifications

General

Brand	Morphy Richards
Model	Supreme Precision 10 in 1 Multicooker
Category	Kitchen Appliances
Language	English