Alternatively, Press the Pulse Button (23) to
blend in short bursts at speed 10.
When finished, your Multicooker will sound
and display ‘END’. Press the Stop Button (30)
and remove the Lid.
Chop
Add your ingredients to the Jug (4) and
attach the Lid
(2).
Follow the steps in ‘To Set-Up Before Use’ to
set-up your Multicooker. Place the Chopping
Blade
(13) onto the Drive Shaft (14).
For use in recipes like pesto.
To Set the Timing Function, (if using)
Press the Timer Button (27) and the first half
of the Timer (32) will flash. Use the Increase
and Decrease Buttons to adjust the timer in
minutes. Press the Timer Button again, the
second half of the Icon will flash, use the
Increase and Decrease buttons to adjust the
timer in seconds. We do not recommend
blending for longer than 1 minute.
Press the Start Button (24). Your Multicooker
will sound and begin to blend.
562000 Rev2.qxp_Layout 1 19/01/2015 09:24 Page 20