Morphy Richards Supreme Precision 10 in 1 Multicooker User Manual

28
• E
1
• T
he motor is overloaded.
• R
educe the amount of food in
the Jug
(4).
• R
emove any food residue from
the Paddle
(11), or Blades
(
12)
,(
13)
.
Error Code Cause Solution
• The device doesn't work. • Your Multicooker is not
connected to the mains.
• The Mains Lead (19) is not
properly connected to the Cable
Socket
(7) on the Main Unit (5).
• The On/Off Switch (9) is set to
off or your Multicooker is in
standby.
• Plug the Mains Lead (19) into
the socket on the wall.
• Switch the On/Off Switch (9) to
off, and insert the Mains Lead
into the Cable Socket.
• Switch the On/Off Switch on, or
press the Standby Button (22).
Problem Issue Solution
• E
3
• T
he Jug
(
4)
i
s not correctly
inserted into the Main Unit
(5).
• The Jug was removed during
use.
• I
nsert or replace the Jug into
the Main Unit.
• E5 • The Motor burn out safety
switch has switched on.
• Let your Multicooker cool down
for at least 30 minutes.
If the problem persists after
cooling down, contact Morphy
Richards.
Error Codes
Troubleshooting
• The buttons (21)-(30) do not
react immediately.
• The buttons on the Control
Panel (8) require the right
contact time.
• Touch or press the buttons for a
longer period.
• Water is leaking from the Lid (2) • The Lid Gasket (16) is not
attached correctly.
• The Lid Gasket in the Lid is
damaged
• Check the Lid Gasket on the
underneath of the Lid is in place
and correctly attached.
• Contact Morphy Richards.
• The Lid (2) is open but the Lid
Lock Icon (33) on the Control
Panel (8) shows the closed
padlock.
• There is some food in the
sensor at the top of the Jug
Handle (3) or on the Main Unit
(5).
• Remove any food residue left
on/in your Multicooker, if the
problem persists, do not use.
Contact Morphy Richards.
• The programme has stopped
before the end.
• Your Multicooker has lost power
temporarily.
• Switch the On/Off Switch (9) to
off, and check the Mains Lead.
Continue the recipe using the
manual settings.
• The Mixing or Pulse functions
are not working.
• The Lid is not correctly attached
to the Jug.
• These functions are not
available during this part of the
process.
• Correctly attach the Lid to the
Jug.
• Do not try to use.
562000 Rev2.qxp_Layout 1 19/01/2015 09:25 Page 28

Morphy Richards Supreme Precision 10 in 1 Multicooker Specifications

General

Brand	Morphy Richards
Model	Supreme Precision 10 in 1 Multicooker
Category	Kitchen Appliances
Language	English