Plug your Multicooker into the mains.
Insert the Jug into the Main Unit. Press down
firmly to lock into place.
Ensure the Drive Shaft (14) is correctly locked
into the Jug (4) using the Lock Ring (15)
located on the base of the Jug. Turn the Lock
Ring clockwise to secure before using your
Multicooker. The Drive Shaft should not be
loose.
Place the Main Unit (5) on a flat, stable
surface away from the worktop edge. Ensure
your Multicooker is secure and stable before
use.
Attach the Lid (2), place on top of the Jug
with the handle located within the cutout on
the Lid. Press down and twist clockwise to
lock into place.
To Attach the Lid
To Set-Up Before Use
When your Multicooker is switched on, if the
Lid is not correctly attached to the Jug the
Mixing Speed (29) and Pulse (23) Buttons will
not be illuminated, and the ‘unlocked’ Lid
Lock Icon (33) will be illuminated.
562000 Rev2.qxp_Layout 1 19/01/2015 09:24 Page 7
To Next Page
Loading...
Need help?
General
