Morphy Richards Supreme Precision 10 in 1 Multicooker User Manual

14
5
When the water has reached 100°C, (the icon
will stop flashing). Press the Stop Button (30)
and remove the Lid. Place the Steaming
Basket
(10) into the Jug. Add the ingredients
to the Steaming Basket.
6
Replace the Lid, reset the temperature to
100°C and set the timer for the correct length
to cook the ingredients in the Steaming
Basket. (As per steps 2-4).
8
After cooking, remove the Lid angling away
from you, the contents will be hot. Allow the
water collected on the inside of the Lid to fall
back into the Jug, to avoid drips onto your
Multicooker. Carefully remove the Steaming
Basket from the Jug.
WARNING HOT STEAM
3
Press the Timer Button (27) and use the
Increase and Decrease buttons to adjust the
timer. Set your Multicooker to 10 minutes to
bring the water to a boil.
4
Press the Start Button (24). Your Multicooker
will begin to heat the water, bringing it to a
boil.
7
Press the Start Button (24). When finished,
your Multicooker will sound and display
‘END’, Press the Stop Button (30).
562000 Rev2.qxp_Layout 1 19/01/2015 09:24 Page 14

Morphy Richards Supreme Precision 10 in 1 Multicooker Specifications

General

Brand	Morphy Richards
Model	Supreme Precision 10 in 1 Multicooker
Category	Kitchen Appliances
Language	English