Morphy Richards Total Control User Manual

6
5
Press the Head Release Lever (4) and lower
the Head Unit (1) pressing down until locked
in position. (You will hear an audible click and
the Lever will return).
4
Place the attachment and Splash Guard into
the Attachment Socket (12). Rotate the
Attachment Sleeve (11) clockwise to secure
into place.
2
Place the Mixing Bowl (3) into the recessed
Bowl Locator (10). Twist anti-clockwise to lock
into place.
1
Press the Head Release Lever (4) and lift the
Head Unit (1). The Head Unit will lock in the
upright position. You will hear an audible click.
Using Your Stand Mixer
6
Add the ingredients to the Mixing Bowl (3).
Do not exceed the maximum quantity (1.5kg).
Before using your Stand Mixer for the first time,
c
lean the Bowl Cover
(
2)
M
ixing Bowl
(
3)
S
plash
Guard
(13) and attachments (14),(15),(16) in warm
s
oapy water. Dry thoroughly.
No parts are dishwasher safe.
E
nsure the mains switch is in the on position ‘1’.
This is positioned on the side of the mixer, near the
m
ains cable entry point.
Before First Use
3
Place the Splash Guard (13) onto the required
attachment (14),(15),(16). The Splash Guard
will fix into the two notches on either side of
the screw thread.
FP400015 MUK REV1.qxp_Layout 1 02/09/2015 10:30 Page 6

Morphy Richards Total Control Specifications

General

Type	Immersion blender
Product color	White
Removable bowl	Yes
Country of origin	China
Bowl capacity	0.75 L
Number of speeds	8
Power source	AC
Package depth	260 mm
Package width	250 mm
Package height	246 mm
Package weight	2280 g
Pallet height	1726 mm
Pallet weight	153920 g
Quantity per pallet	48 pc(s)
Quantity per pallet layer	16 pc(s)
Number of layers per pallet	3 pc(s)
Number of cartons per pallet	12 pc(s)
Number of cartons per pallet layer	4 pc(s)

Weight and Dimensions

Depth	65 mm
Height	390 mm
Weight	1719 g