EN
36
If your fridge is not operating;
• Is there a power failure?
• Is the plug connected to the socket correctly?
• Is the fuse of the socket to which the plug is connected or the main fuse
blown?
• Is there any failure at the socket? To check this, plug your refrigerator to a
socket this is surely operating.
If your fridge is not cooling enough;
• Is the temperature adjustment right?
• Is the door of your fridge opened frequently and left open for a long while?
• Is the door of fridge closed properly?
• Did you put a dish or food on your fridge so that it contacts the rear wall of
your fridge so as to prevent the air circulation?
• Is your fridge lled excessively?
• Is there adequate distance between your fridge and the rear and side walls?
• Is the ambient temperature within the range of values specied in the
operating manual?
If the food in your refrigerator compartment is over cooled
• Is the temperature adjustment right?
• Are there many food recently put inside the freezer compartment? If so, your
fridge may over cool the food inside the refrigerator compartment as it will
operate longer to cool these food.
If your fridge is operating too loudly;
To maintain the set cooling level, compressor may be activated from time to time.
Noises from your fridge at this time are normal and due to its function. When the
required cooling level is reached, noises will be decreased automatically. If the
noises persist;
• Is your appliance stable? Are the legs adjusted?
• Is there anything behind your fridge?
• Are the shelves or dishes on the shelves vibrating? Re-place the shelves
and/or dishes if this is the case.
• Are the items placed on your fridge vibrating?
BEFORE CALLING YOUR AFTER SALES SERVICE
LOPO
"Low voltage
Warning"
This is seen when
the power supply
gets lower than
170 V.
This not a failure. This
prevents any damage
to the compressor. This
warning will clear after
the voltage reaches the
required level.
To Next Page
Loading...
