34
FREQ(?) PARAMETER
Sets (queries) the measurement frequency.
FREQ PARAMETER
Sets the measurement frequency according to the parameter.
There is no return value.
PARAMETER:
ASCII string Numerical code
100Hz 0
120Hz 1
1KHz 2
10KHz 3
100KHz 4
Example:
FREQ 100KHz
FREQ?
Returns the current measurement frequency setting.
Example:
ASC ON
FREQ?
1KHz (
return value
)
ASC OFF
FREQ?
2 (
return value
)
LEV(?) PARAMETER
Sets (queries) the measurement level.
LEV PARAMETER
Sets the measurement level according to the parameter. There
is no return value.
To Next Page
Loading...