51
6. Safety Precaution
SAFETY CONSIDERATIONS
The MT4080 LCR Meter has been designed and tested according
to Class 1A 1B or 2 according to IEC479-1 and IEC 721-3-3,
Safety requirement for Electronic Measuring Apparatus.
SAFETY PRECAUTIONS
SAFETY NOTES
The following general safety precautions must be observed during
all phases of operation, service, and repair of this instrument.
Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument.
The manufacturer assumes no liability for the customer‘s failure to
comply with these requirements.
BEFORE APPLYING POWER
!
Verify that the product is set to match the available line voltage is
installed.
To Next Page
Loading...