USER MANUAL 10
6. AUTOMATIC DOOR OPERATOR CE DECLARATION FORM
DECLARATION OF CONFORMITY
Directive 2006/42/CE -Directive on Machinery-
We hereby declare, under our sole responsibility, that the product and model described here in is conform to
the essential health and safety requirements as described in the following directives issued by the European
Council for the harmonisation of the legal norms in all countries members of the European Union:
Product: Automatic door operator for sliding doors
Model: EvoDrive+
Serial number: All starting with 610
Manufacturer: Linear Motor Applications, S.L.
Pol. Ind. Santiga
Pasaje Arrahona nº4, Nave 1
08210 Barberà del Vallés, Barcelona
Spain
Directives and
standards:
Directive 2006/42/EC: “Machinery Directive”
Directive 2014/30/EU: “Electromagnetic Compatibility (EMC)”
Directive 2014/35/EU: “Low Voltage Directive (LVD)”
EN 16005:2013/AC:2015: “Power operated pedestrian doorsets”
The CE mark is attached to each product, indicating its compliance with the above mentioned directives and
norms. This declaration of conformity applies only when the installation and commissioning of the machine
described herein has been made according to the manufacturer’s installation, user and maintenance manual.
Barberà del Vallès, Barcelona, on the 3rd of January of 2022.
Mr. Oriol Guilera
General Manager - LMA
Linear Motor Applications, S.L.
Pasaje Arrahona n° 4, Nave 1 (Pol. Ind. Santiga)
08210 Barberà del Vallés, Barcelona
Spain
To Next Page
Loading...
