USER MANUAL 6
Only authorized technicians are allowed to open the cover of the door operator and manipulate the internal
parts, for installation and maintenance purposes. The power switch must be turned off before doing any
intervention on the door operator.
End users and non-qualied technicians are strictly not allowed to open the cover and/or manipulate the
internal parts of the door operator.
3. RISK ASSESSMENT
3.1. IDENTIFICATION OF DANGEROUS AREAS
The image below shows the zones of risk of the sliding door.
As indicated in the “Directive on Machinery”, it is understood by:
Danger zone: Any area inside and/or near a machine where, the presence or exposure of a person,
constitutes a risk for the safety and health of that person.
Exposed person: Any person standing or moving completely or partially, within a danger zone.
In relation with the usage of this automatic door operator, the diagrams below show the typical residual risks
in relation with the zones of risk indicated above.
To Next Page
Loading...