Motorline professional LINCE 600

Questions and Answers

M
Mrs. Veronica WallAug 7, 2025
What to do if my Motorline professional LINCE 600 Gate Opener motor opens but doesn’t close?
- D
  David MunozAug 7, 2025
  If your Motorline professional gate opener motor opens but doesn’t close, here are a few things you can check: * First, unlock the motor and manually move the gate to the closed position. Then, lock the motor(s) again, turn off the power supply for 5 seconds, reconnect it, and send the command to open the gate using the transmitter. * Check for any obstructions in front of the photocells. * Also, verify that none of the gate's control devices (key selector, push button, video intercom, etc.) are stuck, sending a continuous signal to the control unit. If you suspect a faulty control device, replace it with a functional one to see if the operator works correctly with the other devices.
R
Rebekah SmithAug 13, 2025
How to troubleshoot a Motorline professional LINCE 600 Gate Opener motor that doesn’t move but makes noise?
- H
  Harold JacksonAug 13, 2025
  If your Motorline professional gate opener motor is making noise but not moving, unlock the motor and move the gate by hand to check for mechanical problems. Also check all motion axis and associated motion systems related with gate and operators (pins, hinges, etc.) to find out what is the problem.
F
ferrellmelissaAug 17, 2025
Why does my Motorline professional LINCE 600 move easily?
- J
  Jennifer MeyerAug 17, 2025
  If your Motorline professional gate moves easily, check the capacitors by testing them through direct connection to the power supply. If the capacitors are not the issue, disconnect the motors from the control board and test them for diagnosis. If the motors function correctly and move the gate forcefully throughout its entire course, the problem lies with the control unit.
L
Laura PayneAug 23, 2025
What to do if Motorline professional Gate Opener opens but doesn’t close?
- C
  Colleen MooreAug 23, 2025
  If your Motorline professional Gate Opener motor opens but doesn’t close, first unlock the motor and manually close the gate. Then, lock the motor(s) again, turn off the power supply for 5 seconds, and reconnect it. Try sending the open command via the transmitter. Also, check for any obstructions blocking the photocells or if any control devices, such as a key selector or push button, are jammed and sending a continuous signal to the control unit.
S
staffordrichardAug 27, 2025
How to troubleshoot Motorline professional Gate Opener when the motor doesn’t move but makes noise?
- A
  Amanda AguirreAug 27, 2025
  If your Motorline professional Gate Opener motor makes noise but doesn't move, unlock the motor and move the gate by hand to check for any mechanical issues. Inspect all motion axes and associated systems like pins and hinges to identify the problem.
J
Joseph GarzaSep 1, 2025
Why does my Motorline professional Gate Opener gate move too easily?
- R
  Robert CollinsSep 2, 2025
  If the Motorline professional Gate Opener gate moves easily, check the capacitors by connecting them directly to the power supply to see if they are faulty. If the capacitors are fine, disconnect the motors from the control board and test them for diagnosis. If the motors don’t work, remove them and send them to Motorline technical services for diagnosis.