• The radio Voice Announcement announces the programmed Wrong Battery.
• The battery icon blinks continuously.
• A repetitive tone sounds.
• Red LED blinks continuously.
NOTE:
The radio alerts you when NNTN8921 and NNTN8930 batteries are attached to the radio
as these batteries are not supported. The radio requires a HAZLOC-certified and compatible
battery by default.
The radio does not display any indication when the radio is connected to the charger or when
the radio and battery is UL certified. Refer to the radio UL Manual for a list of battery which is
UL certified with the radio.
Check with your dealer or system administrator for more information.
4.2
LED Indications
The LED indications represent the operational status of your radio.
Table 1: LED Indications
Indication Status
Solid red Radio is transmitting.
Blinking red Radio is transmitting at low battery condition or detects an incompatible
battery.
Double blinking red Radio is transmitting an emergency alarm or call.
Rapid blinking red Radio has failed the self-test upon powering up or encountered a fatal
error.
Solid yellow Channel is busy in conventional mode.
Blinking yellow Radio is receiving a secured transmission.
Solid green Radio is powering up or is on a non-priority channel while in the Scan List
Programming mode.
Blinking green Radio is receiving an individual or telephone call or is on a Priority-Two
channel while in the Scan List Programming mode.
Rapid blinking green Radio is on a Priority-One channel while in the Scan List Programming
mode.
4.3
Status Icons
Selected icons are also shown on the first row of the 112 x 32 pixel top monochrome display screen of
your radio.
Icon Description
Radio is receiving a call or data.
MN006727A01-AE
Chapter 4 : Status Indicators
23
To Next Page
Loading...
Need help?
General
