Radio plays the saved call automatically if call saving is successful.
A tone sounds if call saving is not successful.
• Playback the saved calls using the preprogrammed Record Playback button:
a. Short press the preprogrammed Record Playback button to playback the saved calls.
b. Short press the preprogrammed Record Playback button again to skip to the next saved
call. If there is only a single saved call, the playback skips to the end of the call.
Radio auto playback the most recent incoming call followed by saved calls in chronological
order.
Radio displays the playback status.
NOTE:
Received call overwrites the ongoing record playback. User can short press the
programmable button within three seconds to continue the playback and ignore the
receiving call.
User can short press the programmable button to trigger playback when the radio is
receiving call to overwrite the receiving call.
Playback can be halted by any tone and button press except for specific buttons. Check
with your dealer or system administrator for more information.
7.8
In-Call User Alert
This feature allows the radio to remain muted to affiliated talkgroup calls or dispatch calls while
operating on the current Trunking Personality or conventional channel respectively.
Group and individual Pages unmute the radio for the alert tone to sound. The radio also unmutes to
individual radio-to-radio calls. This feature is very useful when a radio-user prefers to not hear affiliated
talkgroup or dispatch calls traffic, but needs-to remain in radio contact. For an In-Call User Alert
enabled channel, the Voice Mute button-press or the Voice Mute menu-selection allows the radio-user
to toggle on and off Voice Mute functionality.
7.9
Emergency Operation
The Emergency feature is used to indicate a critical situation. An emergency signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
Only one Emergency mode can be assigned to the Emergency button.
Your radio is also programmed to operate in one of the following conditions:
Tactical/Non-Revert
The radio sends an emergency alarm and/or makes an emergency call on the current channel.
MN006727A01-AE
Chapter 7 : Advanced Features
44
To Next Page
Loading...
