EasyManuals Logo

Motorola solutions APX 8000HXE User Manual

Motorola solutions APX 8000HXE
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
7.24.10
Digital PTT ID Support
This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving
a transmission. The receiving radio and the dispatcher can view the ID, which consists of up to a
maximum of eight characters.
The ID number of your radio is also automatically sent every time you press the PTT button. This
feature is preprogrammed per channel. For digital voice transmissions, the ID of your radio is sent
continuously during the voice message.
7.24.11
Smart PTT (Conventional Only)
Smart PTT is a per-personality, programmable feature used to keep radio users from talking over
other radio conversations. When Smart PTT is enabled in your radio, you cannot transmit on an active
channel.
The following table shows the variations of Smart PTT.
Mode Description
Transmit Inhibit on Busy Channel with Carrier You cannot transmit if traffic is detected on the
channel.
Transmit Inhibit on Busy Channel with Wrong
Squelch Code
You cannot transmit on an active channel with a
squelch code or (if secure-equipped) encryption
key other than your own. If the PL code is the
same as yours, the transmission is not preven-
ted.
Quick-Key Override Your radio must be preprogrammed to allow
you to use Quick-Key Override. This feature
works with either one of the two above varia-
tions. You can override the transmit-inhibit state
by quick-keying the radio (press PTT button
twice within the preprogrammed time limit).
7.24.12
Transmit Inhibit
This feature allows you to stops all transmission including voice and data. The radio can receive
messages but not able to reply the acknowledgment request of the received message.
This feature is available for APCO 25 trunking, Type II trunking and Conventional operations for all
APX radios.
You can physically control the transmission of the radio especially during operation in hazardous
environments. An environment is considered hazardous if radio transmission could initiate an explosion
or other dangerous reactions.
MN006727A01-AE
Chapter 7 : Advanced Features
71

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola solutions APX 8000HXE and is the answer not in the manual?

Motorola solutions APX 8000HXE Specifications

General IconGeneral
BrandMotorola solutions
ModelAPX 8000HXE
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals