• or to the required ID.
3 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
When you are connected, the display shows the ID of the target radio.
If no acknowledgment is received, the display shows No acknowledge.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press to return to the Home screen.
5.5.3
Making an Enhanced Private Call (Trunking Only)
Prerequisites:Your radio must be preprogrammed to allow you to use this feature.
When and where to use:This feature allows you to send an individual Call Alert Page if there is no
answer from the target radio. See Sending a Call Alert Page on page 51 for more information.
Procedure:
1
or to Call, and press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
2 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below LNum to go to the last number dialed.
• or to the required ID.
3 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
When you are connected, the display shows the ID of the target radio.
If no acknowledgment is received, the display shows No acknowledge.
If the target radio does not respond before the time out, the display shows No answer.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press
to return to the Home screen.
5.5.4
Making a Telephone Call (Trunking Only)
This feature allows you to make calls similar to standard phone calls to a mobile or landline phone.
MN003110A01-AK
Chapter 5: General Radio Operation
36
To Next Page
Loading...
Need help?
General
