2 Press Ok to continue pairing the radio and the device.
The pairing process can be canceled by pressing the Menu Select button below Cncl.
If successful, the display shows Pairing in progress,<Device Friendly Name>
paired, Connecting in progress... followed by <Device Friendly
Name>connected. The display returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will occur:
• The display shows <Device Friendly Name> pair failed (if the PIN numbers are
different).
• <Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
6.21.5
Turning On the Bluetooth Audio
When and where to use:Do one of the following to turn on the Bluetooth audio. You can use the
options interchangeably depending on your preference and the programmed functions.
Procedure:
• Turning on the Bluetooth audio using the radio menu BT:
a.
or to BT. Press the Menu Select button directly below BT to access the Bluetooth
feature screen.
b. or to Bluetooth spkr and press the Menu Select button directly below On.
The display shows On.
c. To return to the Home screen, press the Menu Select button directly below Exit.
• Turning on the Bluetooth audio using the preprogrammed button:
a. To route the audio routing from the radio to the headset, press the preprogrammed
Bluetooth Audio Reroute button.
You hear a short, medium-pitched tone. The display shows Headset on.
BT audio routing can be configured in CPS to route the audio to RSM or radio's internal speaker.
The audio routes to the radio's speaker if RSM is not connected. Check with your dealer or
system administrator for more information on the programming of this feature.
NOTICE: For BT PTT press, the active microphone can be configured in CPS to transmit
from either the RSM, the radio microphone, or the BT headset. If the configured device
is not available, audio transmission reverts to BT headset.
6.21.6
Turning Off the Bluetooth Audio
When and where to use:Do one of the following to turn off the Bluetooth Audio. You can use the
options interchangeably depending on your preference and the programmed functions.
Procedure:
• Turning off the Bluetooth audio using the radio menu BT:
MN003110A01-AK
Chapter 6: Advanced Features
89
To Next Page
Loading...
Need help?
General
