Motorola solutions BC300D User Manual

Attaching the Universal Connector
Cover
The universal connector is located beside the antenna. You
can connect authorized accessories to the radio through
the universal connector.
Replace the universal connector cover or dust cover when
the universal connector is not in use.
1 Insert the slanted end of the cover into the slots
above the universal connector.
2 Secure the connector cover to the radio by pressing
the cover inwards.
Removing the Universal Connector
Cover
Remove the universal connector cover or dust cover
by pulling the cover out.
English
13

Motorola solutions BC300D Specifications

General

Brand	Motorola solutions
Model	BC300D
Category	Two-Way Radio
Language	English