Calls
Depending on the type of call, you can make, receive, and
respond to calls in both Conventional Analog and Digital
mode.
Group Calls
Group Calls are calls from an individual radio to a group of
radios. To communicate in a group, your radio must first be
configured as a part of the talkgroup.
Making Group Calls
1 To select a channel with an active group ID, perform
one of the following actions:
• Toggle the Channel Selector knob.
• Press the programmed One Touch Access
button.
2 To call, press the PTT button.
3 Wait for the Talk Permit Tone to end, and speak into
the microphone.
4 To listen, release the PTT button.
If your radio does not detect voice activity for a
predetermined period, the call ends.
Responding to Group Calls
When you receive Group Calls, your radio shows the
following indications:
• The green LED illuminates.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 To respond, press the PTT button.
2 Wait for the Talk Permit Tone to end, and speak into
the microphone.
3 To listen, release the PTT button.
English
18
To Next Page
Loading...
