1-4 56F8323EVM User Manual MOTOROLA
1.3 56F8323EVM Connections
An interconnection diagram is shown in Figure 1-3 for connecting the PC and the external
+12.0V DC/AC power supply to the 56F8323EVM board.
Perform the following steps to connect the 56F8323EVM cables:
1. Connect the parallel extension cable to the Parallel port of the host computer.
2. Connect the other end of the parallel extension cable to P1, shown in Figure 1-3,
on the 56F8323EVM board. This connection allows the host computer to control
the board.
3. Make sure that the external +12V DC, 1.2A power supply is not plugged into a
+120V AC power source.
4. Connect the 2.1mm output power plug from the external power supply into P3,
shown in Figure 1-3, on the 56F8323EVM board.
5. Apply power to the external power supply. The green Power-On LED, LED13, will
illuminate when power is correctly applied.
Figure 1-3. Connecting the 56F8323EVM Cables
PC
Cable
Parallel Extension
56F8323EVM
External
+12V
Power
P1
P3
Connect cable
to Parallel / Printer port
with 2.1mm,
receptacle
connector
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
To Next Page
Loading...
