2-24 56F8323EVM User Manual MOTOROLA
2.14.7 Timer Channel C Expansion Connector
The Timer Channel C port is an MPIO port attached to the Timer C expansion connector.
This port can be configured as a Quad Timer Interface, as SCI0 signals, or as GPIO. Refer
to Table 2-20 for the signals attached to the connector.
2.14.8 FlexCAN Expansion Connector
The FlexCAN port is an MPIO port attached to the FlexCAN expansion connector. This
port can be configured as a FlexCAN Interface or as GPIO. Refer to Table 2-21 for
connection information.
Table 2-19. Timer A Signal Connector Description
J7
Pin # Signal Pin # Signal
1 PHASEA0 / TA0 / PB7 2 PHASEB0 / TA1 / PB6
3 INDEX0 / TA2 / PB5 4 HOME0 / TA3 / PB4
5 GND 6 +3.3V
Table 2-20. Timer Channel C Connector Description
J9
Pin # Signal Pin # Signal
1 TC0 / TXD0 / PC6 2 TC1 / RXD0 / TC5
3 GND 4 TC3 / PC4
Table 2-21. CAN Connector Description
J10
Pin # Signal Pin # Signal
1 CAN_TX / PC3 2 GND
3 CAN_RX / PC2 4 GND
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
To Next Page
Loading...
