Motorola 700 Series - Page 119

The 162Bug Debugger Command Set
4-23
4
MENU Menu MENU
MM Memory Modify MM addr [; [[B|W|L|S|D] [A] [N]]|[DI]]
MMD Memory Map Diagnostic MMD range increment [; B|W|L]
MS Memory Set MS addr {hexadecimal number} {'string'}
MW Memory Write MW addr data [; B|W|L]
NAB Automatic Network Boot
Operating System
NAB
NBH Network Boot Operating
System and Halt
NBH [controller LUN] [device LUN]
[client IP Address] [server IP Address] [string]
NBO Network Boot Operating
System
NBO [controller LUN] [device LUN]
[client IP Address] [server IP Address] [string]
NIOC Network I/O Control NIOC
NIOP Network I/O Physical NIOP
NIOT Network I/O Teach NIOT [; [H]|[A]]
NPING Network Ping NPING controller-LUN device-LUN
source-IP destination-IP [n-packets]
OF Offset Registers
Display/Modify
OF [Rn [; A]]
PA Printer Attach PA [port]
NOPA Printer Detach NOPA [port]
PF Port Format PF [port]
NOPF Port Detach NOPF [port]
PFLASH Program FLASH Memory PFLASH SSADDR SEADDR DSADDR
[IEADDR]
[;[A|R][X]]
or PFLASH SSADDR:COUNT DSADDR
[IEADDR]
[;[B|W|L][A|R][X]]
PS Put RTC Into Power Save
Mode for Storage
PS
Table 4-3. Debugger Commands (Continued)
Command
Mnemonic
Title Command Line Syntax