Need help?Do you have a question about the Motorola MVME162 and is the answer not in the manual?
General| Model | MVME162 |
|---|---|
| Category | Controller |
| Processor | Motorola 68040 |
| Bus Type | VMEbus |
| Form Factor | 6U VME |
| Clock Speed | 25 MHz or 33 MHz |
| Memory | Up to 16 MB DRAM |
| I/O Ports | Multiple I/O ports |
| Ethernet | 10Base-T Ethernet interface |
| Operating System | VxWorks, UNIX |
| Operating Temperature | 0°C to 55°C |
| Power Supply | +5V DC |
| Power Consumption | Typically 15W |
Outlines essential safety guidelines for operation and service.
Details proper grounding procedures to minimize shock hazard.
Advises against operation in explosive atmospheres.
Warns against accessing live circuits and removing covers.
Recommends not servicing alone and cautions about dangerous voltages.
Cautions about CRT handling and part substitution.
Lists the technical specifications of the module.
Specifies environmental and airflow needs for optimal operation.
Provides considerations for operating in high-temperature environments.
Covers initial setup and configuration steps.
Explains jumper settings for system controller configuration.
Guides on installing the MVME162 into a system.
Step-by-step guide for installing the main module.
Provides detailed memory address breakdowns.
Details memory mapping for local bus masters.
Explains how to initialize the module via software.
Provides a comprehensive overview of the module.
Describes the main processor.
Describes static RAM and its backup.
Describes the dynamic RAM options and architecture.
Explains VMEbus connectivity.
Details the EIA-232-D serial interface.
Details the EIA-530 serial interface.
To Next Page
