Motorola 700 Series - Page 154

Index
IN-4
I
N
D
E
X
L
LAN driver 3-20
LAN interface 1-22
LEDs 1-13
local bus
access from VMEbus 1-33
arbiter 1-26
timeout function 1-25
local processor resources 1-24
location monitors, GCSR and 2-19
longword, definition of 1-12
M
mantissa field (floating point support) 4-18
manufacturing test process 3-25
mapping, EPROM/Flash 2-11
MC2chip 2-10, 2-12
MC68040 MPU 1-15
cache 1-15
TRAP instructions 4-11
memory, EPROM and Flash 1-20
memory boards 2-13
memory map
local bus 1-27
local I/O devices 1-30
VMEbus 1-33
VMEbus short I/O 1-33
memory mezzanines
board options 2-13
stacking options 2-14
memory options 1-16
memory requirements, 162Bug 3-13
metasymbols, command syntax and 4-3
mezzanine boards 2-13
microprocessor, description of 1-15
MPCR (Multiprocessor Control Register) RAM
sharing method 3-22
MPU clock speed calculation 3-13
multiprocessor support 3-22
MVME162Bug (162Bug) 1-16, 2-3, 3-1
MVME162LX
block diagram 1-14
features 1-6
installation 2-16
specifications 1-8
MVME328 SCSI controller B-1, B-2, B-3
MVME374/376 LAN controllers C-1
N
negation, definition of 1-12
network
boot control module 3-21
boot function 3-10
controller modules supported C-1
I/O error codes 3-22
I/O support 3-19
non-volatile RAM (NVRAM) A-3
normal address range 1-28
no-VMEbus-interface option 1-16, 3-7
numeric values and base identifiers 4-4
NVRAM (non-volatile RAM) A-3
O
object code 4-10
offset registers 4-7
operating environment, debugger 4-11
operating temperature 1-9
operating the board 3-3
operational parameters, 162Bug A-3
option field, command line 4-3
overview, MVME162LX 1-1
P
parameters, 162Bug 3-19
parity DRAM 2-13
ports
0 or 00 4-9
1 or 01 4-9
2 or 02 4-9
3 or 03 4-9
port numbers 4-3, 4-9
program execution, remote 3-22
programs, entering and debugging 4-9
prompt, debugger 4-1
protocol modules
BOOTP 3-21
RARP/ARP 3-21
TFTP 3-21
UDP/IP 3-20
pseudo-registers 4-7
publications, non-Motorola 1-5