Page 47
ADVANCED INFORMATION
2
Programming Rates
Programming Rates
Call meter rates can be programmed as either
currency-per-minute or charge units-per-
minute. In either case, the minimum time
interval increment is 30 seconds.
To programme rates:
Security Code
Home Rate
Roam Rate
The roam rate is initially set to the home rate
to prevent you from setting it to zero by
mistake.
Automatic Monitor Displays
Automatic Monitor Displays
You can automatically display the time or
charge of each outgoing call both during and
after the call.
To select/cancel:
To toggle feature on:
Select either 'Auto Timer' or
'Auto Meter' using the scroll keys.
to confirm selection.
To toggle feature off:
To Next Page
Loading...
