3
ACCESSORIES AND OPTIONS
Page 78
Micro Car Kit Operation
Micro Car Kit Operation
Turn off your phone before attaching or
detaching the car kit coil cord (or optional
Battery Saver
coil cord if using the
Simple
Micro Car Kit
). Attach the coil cord by sliding
the flat end of the connector into the connec-
tor slot on the back of the phone. You will
hear a click when proper connection is made.
To unplug the coil cord, squeeze both sides of
the connector until the tabs release, then
remove from phone. When not in use, place
the coil cord connector into the storage slot
located on the top surface of the telephone
holder.
Place your phone (bottom end first) into the
holder,
1
then pivot the phone's top backwards
until it clicks into place as shown in figure 1.
2
release button
Figure 1. Insertion of Pocket Telephone into Car Kit
Charger/Holder
1
2
To Next Page
Loading...
