Page 65
ADVANCED INFORMATION
2
When the Call Waiting feature is on and a
call is in progress, a second caller to your
phone will hear the ring tone. Your phone will
produce a single beep, followed by a double
beep every eight seconds and the display will
show ‘Call Waiting’.
If however the feature is off, a second caller
will hear the busy tone.
Call Holding
This feature is controlled by your Network
Operator and is used in conjunction with the
call waiting feature to produce several
different results.
Call Hold and Waiting Combinations
If a call is active and there is no call waiting:
The active call will be placed on hold and
the display will show ‘Holding’ to indicate
that the hold request is in progress. The
display will show ‘Call Holding’ when the
process is complete.
or
The active call will end and the phone will
be available for further calls.
To Next Page
Loading...
