Using Message Services 145
+
Enter Service Center Number
Use this feature to enter the number for the service
center that forwards your outgoing messages. You
must specify a service number before you can send
any messages.
Note: This feature must be activated by your
service provider. Contact your service provider for
additional information.
Satellite Mode
To enter the service center number in satellite
mode:
Tip:
The
service center
number is
normally
provided by
your service
provider.
1. Follow the steps in “Getting to Message
Settings...” to get to
Service Centre, and then
press
O to select. You will see Enter Service
Number
followed by your current service center
number. If this is the first time you have stored
a number, continue with step 3.
2. Press
C to clear one digit at a time, or
press and hold
C to erase the entire
number.
3. Enter the new number, and then press
O.
You will see
Completed.
4. Press and hold
C to exit the menu.
Cellular Mode
This feature is not available in cellular mode.
To Next Page
Loading...