Motorola 9505 - Change the Sim Card Pin Code; Unblock the PIN Code

158 Customizing Phone Features
Change the SIM Card PIN Code
To choose your own PIN code:
1. Follow the steps in “Getting to Require SIM
Card PIN...” to get to
Change SIM Card PIN, and
then press
O to select. You will see
Enter Old PIN.
2. Enter the current PIN code, and then
press
O. You will see Enter New PIN.
3. Enter a new PIN code, and then press
O.
You will see
Repeat New PIN.
4. Re-enter the new PIN code, and then
press
O again. You will see Completed.
5. Press and hold
C to exit the menu.
Unblock the PIN Code
Tip: The
message
Blocked
indicates that
an incorrect
PIN code was
entered. The
message
! Blocked
indicates that
an incorrect
PIN2 code was
entered.
If your PIN code is entered incorrectly three times in
a row,
Blocked appears in the display. You need to
enter a PIN unblocking key (PUK1), which you can
obtain from your service provider.
1. Press
* * 0 5 *.
2. Enter unblocking key. Enter the eight-digit
PUK1 unblocking key, and then press
O.
Your service provider supplies this code.
3. Enter a new PIN code, and then press
O.
4. Re-enter the new PIN code, and then
press
O.
Getting to Require SIM Card PIN...
1. Press M until you see Phone Setup, and then press O.
2. Press M to scroll to Require SIM Card PIN, and then press O.
3. Press M to scroll to one of the features described below.