42 Using Your Phone
Startup Procedures
Turn the Power On and Off
1. Insert your SIM card if necessary. (See
“Installing/Removing the SIM Card” on
page 28.)
2. Press and hold
S to turn the phone on and
off.
3. If your SIM card is PIN-code protected, enter
the SIM card PIN code (a four- to eight-digit
number given to you by your service
provider), and then press
O to continue.
Caution: If you enter an incorrect SIM card
PIN code three times in a row, your SIM card
will be disabled. See “Protecting the SIM
Card” on pages 157-158 for more
information.
When you turn your phone’s power on, you will hear
the wakeup tone (or feel a vibration if the VibraCall
®
alert function is activated) and see the wakeup
screen. The wakeup screen displays a short
animated sequence that reminds you to rotate and
extend the antenna, and shows how to hold the
phone for best reception (see illustration). You may
see a number of other power-on messages
(described on pages 43-44).
When the
m (no service) indicator disappears and
the
n (home system) indicator appears, you are
ready to make a call.
H
To Next Page
Loading...