170 Customizing Phone Features
Clear All Stored Information
The master clear feature resets the same items as
master reset, plus the following:
• clear phone book entries from phone
memory (not from SIM memory)
• clear last ten calls made and received lists
• reset resettable call timers
Master clear does not clear the:
• fixed dial list
• my number(s) list
• received messages list
Satellite Mode
To clear all settings:
1. Follow the steps in “Getting to Phone
Status...” to get to
Master Clear, and then
press
O to select. You will see Enter
Security Code
.
Tip:
The
factory default
security code
is 000000.
2. Enter your six-digit security code.You will
see
Reset Complete.
3. Press and hold
C to exit the menu.
Cellular Mode
This feature is not available in cellular mode.
However, when you clear your settings from satellite
mode, your cellular settings are cleared as well.
Getting to Phone Status...
1. Press M until you see Phone Setup, and then press O.
2. Press M to scroll to Phone Status, and then press O.
3. Press M to scroll to one of the features described below.
To Next Page
Loading...