23
➌ Press and release G until 3 is displayed.
➍ Press I to move the cursor to the hour digit.
➎ Press F or G to adjust the hour digit.
➏ Repeat steps 4 and 5 to adjust the on and off time setting .
➐ Press K to activate your selection.
The symbol _ is displayed in the Standby screen when private time is
enabled.
Note:
If the on time is equal to the off time, private time is not enabled.
To Disable Private Time
➊ Press K.
➋ Press H to move the cursor to 3.
➌ Press K.
➍ Press and release G until µis displayed.
➎ Press K to disable private time.
Note:
To exit from any screen without making changes, press J.
PRIVATE TIME
1029B40Book Page 23 Tuesday, September 2, 1997 10:49 AM
To Next Page
Loading...
Need help?
General