22
Private Time
You can select a time period during which your pager is completely silent.
Your pager still receives messages but is does not alert. The pager alerts
only if an alarm expires or a priority message is received.
To Set Private Time
➊ From the Function menu, press H to move the cursor to 3.
➋ Press K.
When the Private-time screen is first displayed, the cursor is at the flashing
symbol on the far left, 3 indicates private time is enabled, µindicates
private time is disabled.
Example of Set Private-Time Screen
ON OFF
3 3:15PM 5:00PM
PRIVATE TIME
1029B40Book Page 22 Tuesday, September 2, 1997 10:49 AM
To Next Page
Loading...
